MEDIUM TUBE FRAME SPECIFICATIONS

Where to find Model, Serial and spec. Number

 

 

ENGINE

  
     
Manufacturer  TECUMSEH  
Model/Spec HH-100-115181 D Model 1055 (G-10)
  HH-120-120061 B Model 1220 (193)
  HH-120-120199 E Model 1255 (G-12)
  HH-120-120090 C Models 1253 & 1257
  HH-140-160001 Model 1453 (G-14)
  HH-140-160001 Model 1456 (H-14)
  HH-150-170001 Model 1556
  HH-160-170005 Model 1656 (H-16)
     
Manufacturer  WISCONSIN MOTORS  
Model/Spec S7D - 218981 Model 800 (186/87/88)
  S8D - 271995 Model 850 (191)
  S8D - 231552 Model 900 (189)
  TR10D - 241195 Models. 1000 (190) & 1050 (192-01)
  TRA10D - 285633 Models 1050 (192-02), 1053, 1054
  TRA12D - 318973 Model 1225 (194)
  TRA12D - 335600 Models 1254 & 1256
  TRA12D - 357448 Models 1254 & 1256
     

 

 

CHASSIS

  
Type  All Models Horz. shaft, air cooled, 1 cyl., 4 cycle
Bore and Stroke  HH-100 & HH-140 3-5/16 X 2-3/4
  HH-120, HH-150 & HH-160 3-1/2 X 2-7/8
Piston Displacement HH-100 & HH-140 23.7 cu. in.
  HH-120, HH-150 & HH-160 27.66 cu. in.
Mfr's H.P. Rating HH-100  10 H.P. @ 3600 RPM 
  HH-120 12 H.P. @ 3600 RPM
  HH-140 14 H.P. @ 3600 RPM
  HH-150 15 H.P. @ 3600 RPM
  HH-160 16 H.P. @ 3600 RPM
Crankshaft Extension HH-100 & HH-120 1.000/.999 Dia. x 3-7/16
  HH-140, HH-150 & HH-160 1.125/1.124 Dia. x 3-3/32
Air Cleaner  All Models Paper element
Oil Capacity HH-100, HH-120-120090 C, HH-120-12099E, HH-140, HH-150
& HH-160		 3 Pints
  HH-120 - 120061 B 2 Pints
Gasoline Capacity All Models Steel Tank - 4 Qts.
    Plastic Tank - 5 Qts.
Governor  All Models Mechanical
Speed Control All Models Remote, cable operated
Spark Plug  HH-100 & HH-120 Champion J-8 or equivalent
  HH-140, HH-150 & HH-160 Champion L-7 or equivalent
Spark Plug Gap All Models  0.030
Point Gap AII Models Solid State
        
Manufacturer  WISCONSIN MOTORS  
Model/Spec S7D - 218981 Model 800 (186/87/88)
  S8D - 271995 Model 850 (191)
  S8D - 231552 Model 900 (189)
  TR10D - 241195 Models. 1000 (190) & 1050 (192-01)
  TRA10D - 285633 Models 1050 (192-02), 1053, 1054
  TRA12D - 318973 Model 1225 (194)
  TRA12D - 335600 Models 1254 & 1256
  TRA12D - 357448 Models 1254 & 1256
Type  All Models Horz. shaft, air cooled, 1 cyl., 4 cycle
Bore and Stroke S7D 3 x 2-5/8
  S8D & TR10D 3-1/8 x 2-5/8
  TRA10D 3-1/8 x 2-7/8
  TRA12D 3-1/2 x 2-7/8
Piston Displacement S7D 18.6 cu. in.
  S8D & TR10D 20.2 cu.in.
  TRA10D 22.05 cu. in.
  TRA12D 27.66 cu. in.
Mfr's H.P. Rating S7D 7.25 H.P. @ 3600 RPM
  S8D & TR10D 8.25 H.P. @ 3600 RPM
  TRA10D 10.1 H.P. @ 3600 RPM
  TRA12D 12.0 H.P. @ 3600 RPM
Crankshaft Extension S7D & S8D 1.000/.999 Dia. x 2-7/8
  TR10D & TRA10D 1.000/.999 Dia. x 2-27/32
  TRA12D 1.125/1.124 Dia. x 2-27/32
Air Cleaner All Models Oil Bath or Paper element
Oil Capacity All Models 1 quart
Gasoline Capacity All Models Steel Tank  -4 Qts.
    Plastic Tank - 5 Qts.
Governor  All Models Mechanical
Speed Control All Models Remote, cable operated
Spark Plug  All Models  Champion D-16J or equivalent
Spark Plug Gap All Models  0.030
Point Gap S7D, S8D, TR10D & TRA10D 0.020
  TRA12D  Solid State
     
SPECIFICATIONS CHASSIS Rev. 5/78
Type  All Models Steel, tubular frame
Height  All Models 40 inches
Width  600, 800 30 inches
  650, 650, 750  301/2 inches
  All Other Models 34 inches
Length  600  60 inches
  650, 750, 850, 853 62-1/2 inches
  All Other Models 63 inches
Wheel Base  600  40 inches
  650, 750, 850, 853 42-1/2 inches
  All Other Models 43 inches
Turning Radius 600  36 inches
  800  42 inches
  All Other Models 40 inches
Ground Clearance - Rear Axle  All Models 7 inches
Shipping Weight 600 (180) 490 Ibs
  600 (181)  530lbs.
  650 (184), 750 (171) 530 Ibs.
  650 (185), 750 (172) 585 Ibs.
  800  595 Ibs.
  850, 853 550 Ibs.
  900  625 Ibs.
  1000  665 lbs.
  1254,1453 675 Ibs.
  1256, 1257, 1456 (H-14), 1556, 1656 (H-16) 680 Ibs.
  All Other Models 645 Ibs.
Transmission  600, 650, 750, 855 (G9),1055 (G10), 1155 (G11) All gear; 3 speed w/transaxle (manual belt change for high/ low range)
  800, 850, 900 All gear; 3 speed w/transaxle & controlled differential (console mounted belt changer lever for high/low range)
  853  All gear; 3 speed w/transaxle (console mounted belt changer lever for high/low range)
  1000, 1050, 1053, 1054, 1220, 1253, 1254, & 1255 (G12) 1453 (G14) All gear; 6 speed w/transaxle controlled differential; built  in high/low range
Transmission  1225, 1256, 1257, 1556, 1656 (H16), 1456 (H-14) Model 10 Eaton hydrostatic w/transaxle & controlled differential; infinite speed range in forward & reverse
Approx. Max. Speed Gear Transmission

Forward 3/4-6 mph 

Reverse 1-2 1/2 mph
  Hydrostatic Transmission

Forward 0-6 3/4 mph 

Reverse 0-3 1/2 mph
Tires  600, 650, 750, 800 Front 4.00-8
Rear 6.00-12
  850, 853 Front 4.00-8
Rear 8X8.50-12
  900, 1000, 1050, 1053, 1054, 1220, 1225, 1253, 1254, 1256 (01),  Front 16x6.50-8
Rear 23x8.50-12
  855 (G9), 1055 (G10), 1155 (G11)

Front 4.80/4.00-8 

Rear 23x8.50-12
  1256 (02 thru 07), 1257, 1556, 1656 (H16) Front 16x6.50-8
Rear 23x10.50-12
  1255 (G12), 1453 (G14), 1456 (H-14, 1656 (H16)  Front 16x6.50-8
Rear 23x9.50-12

 

To help to identify your tractor, you may try to discriminate from this :

  • Tractor mounted on Tube Frame are medium frame, in other words, small and large frame are not tube frame. All the Models listed below are tube frame.

  • Models 600, 650, 750, 800, 900 and 1000 has rounded hood without headlights, all others have headlights.

  • Models 600, 650, 750, 855 (G9), 1055 (G10), 1155 (G11) has 3 speed w/transaxle with manual belt change for high/ low range,

  • Models 800, 850, 900 has 3 speed w/transaxte & controlled differential and console mounted belt changer lever for high/low range,

  • Model 853 has 3 speed w/transaxte and console mounted belt changer lever for high/low range, but no controlled differential,

  • Controlled differential can be identify by the the freehand wheel on the right rear wheel center axle,

  •  All Models : 1000, 1050, 1053, 1054, 1220, 1253, 1254, & 1255 (G12) 1453 (G14) has 6 speed w/transaxle controlled differential; built in high/low range in the transaxle (not belt changer).